0.75 HP Elite TENV Electric Motor with Base
0.75 HP TENV Electric Motor with Base
The 0.75 HP Electric Motor with Base has a welded plate on the bottom of the motor so that you can mount the motor to a flat surface. The 0.75 HP Elite Electric Motor is a single phase, dual voltage boat lift motor and a direct replacement for AO smith, Dayton and Leeson electric motors. The motor comes prewired for 240 volt operation and can easily be changed to 120 volt operation. We recommend using an electrical professional for any wiring changes. The motor runs at 1725 RPM operating at 10.8 amp (120volt) or 5.4 amps (240 volts) with a frequency of 60 Hz and service factor of 1.0. This TENV motor can withstand temperatures up to 40 degrees Celsius and has a run time of 15 minutes . It is recognized by UL with a C-UL-US stamp. 1 year manufacturers warranty.
Specifications
General Specifications
| Weight: | 20.55 lbs. | Individual Box Size: | 15 in. x 10 in. x 10 in. |
| Product Length: | 10.75 in. | Product Width: | 6.75 in. |
| Product Height: | 8.50 in. | Shaft Width: | 0.625 in. |
| Shaft Length: | 2 in. | Country of Origin: | China |
| Model #: | 93197 | Retail SKU: | 79601 |
Nameplate Specifications
| HP: | 0.75 (3/4) | Voltage: | Dual (115v / 230v) |
| Phase: | 1 | Amps: | 10.8 (115v) / 5.4 (230v) |
| RPM: | 1725 | Hz: | 60 |
| Frame: | 56 | Service Factor: | 1.0 |
| SFA: | N/A | Type: | C |
| AMB: | 40°c | Time: | 15 MIN |
| HSG: | TENV | Code: | L |
| Insulation: | B | Thermally Protected: | None |
| UL: | Recognized | UL Stamp: | C-UL-US |
Technical Specifications
| Electrical Type: | Capacitor Start | Rotation: | Selective |
| Shaft Type: | NEMA 56 | Shaft Extension: | 1.88 in. |
| Frame Length: | 7.1875 in. | Mounting: | Resilient Base – Extended Studs |
| Drive End Bearing: | Ball | Opp Drive End Bearing: | Ball |
| Frame Material: | Rolled Steel | Replacement Capacitor: | 465 uF |
| Capacitor SKU #: | BH02247 | Keystock: | Included |
| Keystock Length: | 1 5/16 in. | Keystock Width: | 3/16 in. |
